System 800 OSB Wood Shelving Decks
Build a practical shelf surface with Canadian-made oriented strand board. System 800 OSB wood decks are an economical alternative to all-metal shelves, with cut sizes for the listed frame depths and beam widths.
- Canadian-made oriented strand board (OSB)
- Cut sizes for 48″, 72″ and 96″ beam widths
- Options for 18″, 24″, 30″ and 36″ frame depths
- Supports recommended for 30″ and 36″ depths
Find the right fit
Sizes & part numbers
These are actual cut-panel dimensions, not the nominal frame depth or beam width. For example, 808 1872 measures 16¼″ deep × 71½″ wide.
| Part number | Actual deck depth | Actual deck width |
|---|---|---|
| 808 1848 | 16¼″ | 47½″ |
| 808 1872 | 16¼″ | 71½″ |
| 808 1896 | 16¼″ | 95½″ |
| 808 2448 | 22¼″ | 47½″ |
| 808 2472 | 22¼″ | 71½″ |
| 808 2496 | 22¼″ | 95½″ |
| 808 3048 | 28¼″ | 47½″ |
| 808 3072 | 28¼″ | 71½″ |
| 808 3096 | 28¼″ | 95½″ |
| 808 3648 | 34¼″ | 47½″ |
| 808 3672 | 34¼″ | 71½″ |
| 808 3696 | 34¼″ | 95½″ |
Plan it properly
Choose the panel, then check its support.
Match the cut panel to your frame and beam dimensions. Wood supports are available for 24″, 30″ and 36″-deep shelving and are recommended at 30″ and 36″ depths. No support is offered for the shallower 18″ configuration.
Still comparing surfaces? Read our guide to wire, steel and wood decking for wide span shelving.
Budget-conscious storage
OSB is an economical alternative when an all-metal surface is not needed.
Accurate cut sizes
Select the listed part number rather than cutting a panel to the nominal frame and beam dimensions.
Complete the configuration
Include the required wood supports when planning deeper shelf levels.
Your questions answered
What size wood deck fits an 18 × 72-inch shelf?
For the listed 18″-deep, 72″-wide System 800 configuration, use wood deck 808 1872, measuring 16¼″ deep × 71½″ wide. Confirm the existing frame and beam arrangement before ordering a replacement.
Do all wood shelves require a support?
Supports are recommended for 30″ and 36″ depths and are also available for 24″-deep shelving. The shallower 18″ configuration generally does not need one.
What information should I send for a replacement panel?
Send the frame depth, beam width, actual panel measurements and photos of the beam/deck arrangement so we can verify the fit.
Complete your configuration.
Need help choosing components?
Send your measurements, photos and intended loads. We’ll quote the right parts or a complete System 800 shelving installation.