Lift Equipment
Home / Lift Equipment
Scissor Lift Tables
LT660 P
- Valuable material handling equipment for use as a feeding table on assembly line
- Easy action foot operated hydraulic lift for raising table top to desired level (powered unit excluded)
- Hand operated table descent control (powered unit excluded)
- Over load by-pass valve protects operator and pump
Capacity 660 lbs.
Table size 20” x 32”
Lowered height 12”
Raised height 36”
LT330
Capacity 330 lbs.
Table size 18” x 30”
Lowered height 9”
Raised height 30”
LT440
Capacity 440 lbs.
Table size 20” x 40”
Lowered height 12”
Raised height 40”
LT660
Capacity 660 lbs.
Table size 20” x 32”
Lowered height 11”
Raised height 34”
LT770
Capacity 770 lbs.
Table size 20” x 36”
Lowered height 14”
Raised height 52”
Winch – Operated Easy Lifts
- Ideal for use in factory, office or shipping department
- Can perform numerous functions from lifting objects and positioning
- production at best working height, to moving light loads without tying up heavy equipment
- Maneuvers easily in areas too narrow for a lift truck
- Two swivel casters under forks allow the sop lifter to do a 360 degree turn on twice the length of the base
MA479
Capacity 500 lbs. at 10″ load center
Height 60″
Platform height 20″ x 20″
Lowered platform height 4 1/2″
Lift above floor 52″
Wheels 6″ diameter
Swivel casters 3″ diameter
Weight 98 lbs.
Hydraulic Stacker
- Allow workers to maneuver and lift heavy loads safely to comfortable needed height
- Foot pedal folds safely out of the way
- Front 5” polyurethane casters and rear 3” polyurethane wheels and allows loads to move easily
MN397
Capacity 880 lbs.
Overall dimensions 22 1/2”W x 39”D x 67 3/4”H
Platform dimensions 25 3/4”L x 22 3/4”W
Lowered platform height 4”
Raised platform height 60”
Weight 174 lbs.
Manual Push Stacker’s
S2200 M
Capacity 2200 lbs.
Adj straddle 50”
Fork length 36”
Lowered height 2.6”
Raised height 60”
WPS
- Modern and highly versatile work positioning stacker for all modern material handling needs
- Intermediate-duty and with a lift height of up to 150”
- Manually propelled with up/down level control mounted on dash
- 12V system comes with low-maintenance deep cycle battery
- Built-in 10AMP plug-in battery charger for 115V/ 1PH/ 60Hz power supply
- Foot pedal parking brake supports instant stop action
- Ergonomic spring-loaded steering handle with comfort grip
- Straddle legs adjust to three positions for varying pallet sizes
- Sturdy operator protection screen preserves visibility
Capacity 2200 lbs. at 24” load center
Lift heights 130” / 150”
Fork Size 42” standard, 31” OD adjustment on pin-style forks
XPS
- Ergonomic alternative to manual lifting, intermediate duty stacking and pallet positioning applications
- Up/down lever control mounted on dash and operator protection screen
- Dual push handles mounted at comfort height level on mast
- 12 volt powered lift system, manually propelled
- 12 volt minimum maintenance deep cycle battery and built-in charger for
110/ 1/ 60 plug-in - Straddle legs adjust to three positions for varying pallet sizes
Capacity 2200 lbs. at 24” load center
Lift heights 63” / 98” / 118”
Fork Size 42” standard long forged forks
Powered Walkie Stacker’s
BGL – 22
- Counterbalanced stacker is a cost-effective solution for the stacking and transportation of palletized loads that a straddle stacker or reach truck cannot handle as efficiently
- AC drive motor delivers steady acceleration and travel speeds
- Neutral braking resists rollback on ramps
- Creep speed control allows for easier maneuvering at low speeds in tight places
- Travel, lift, lower and tilt functions are located in the ergonomic operator handle
- Premium AGM battery pack with integral 110V charger
Capacity 2200 lbs.
Lift heights 104” / 128” / 157”
Load center 24”
Fork size 42” standard
Tall load backrest 35”
BGS – 30
- Technologically advanced but user-friendly
- Built-in productivity enhancements, superior AC power and a short turning radius for crowded facilities all ensure efficient performance during the most demanding warehouse applications
- 24V AC drive motor
- 24V ZAPI programmable travel controller supports simple and precise truck positioning
- Creep speed control allows for easier maneuvering at low speeds in tight places
- Travel speed remains constant relative to throttle position regardless of the load
- Regenerative braking kicks in when the forks are 12” above height
- Travel, lift, lower and tilt functions are located in the ergonomic operator handle
- 3” adjustable straddle legs support easy positioning in racked aisles
- Bolt-on high-visibility mast
Capacity 3000 lbs.
Lift heights 104” / 126” / 142” / 157” / 177”
Fork size 42” standard
Travel speed 3.4mph (unloaded) and 3.1 mph (under load)
BGNR – 30
- Power steering for maximum control and efficiency
- 24V AC drive motor
- ZAPl programmable travel controller supports simple and precise truck positioning
- Creep speed control allows for easier maneuvering at low speeds in tight places
- Travel speed remains constant relative to throttle position regardless of the load
- Regenerative neutral braking
- Travel, lift, lower and tilt functions are located in the ergonomic operator handle, which can be operated with either hand
- Hand grips fit the operator’s hand comfortably, reducing fatigue
- High visibility l-beam mast with dual lifting chains
- Pantograph stroke extends the fork carriage beyond the straddle legs
- Integral tilt and side-shift
- 3” straddles are fixed at either 34” ID/42”OD or 42” ID/50”OD
- Heavy-duty two-piece head cover protects major components from impact damage
Capacity 3000 lbs.
Lift heights 106” / 126” / 157”
Battery Package 224 AH
Fork size 42” standard
Travel speed 3.4mph (unloaded) and 3.1mph (loaded)
Options:
- 10” single load wheel
- Straddle ID/OD of 34/43 or 42/50
- ClearView polycarbonate mast guard
- 224 AH AGM battery pack with 110V charger
- 255 AH industrial battery with external charger
